Intelligent bulk powder spreader
The intelligent bulk powder spreader is used to distribute cement and lime in the construction of asphalt pavement in-situ cold regeneration,highway,railway,airport base and other projects.The cement is evenly distributed,which solves the problems of uneven manual paving of powder,low construction efficiency and flying dust in the past.
Intelligent bulk powder spreader;Top 10 features:
1.Independent power unit,diesel engine driven hydraulic pump,inlet valve group to distribute flow,strong and stable performance.Just start when the job is finished and close it.
2.Synchronized with the vehicle,the imported on-board controller is set through the LCD touch screen to display the distribution status in real time.When the vehicle speed changes,keep the spreading amount constant and spread evenly.
3.The metering is accurate and the distribution is uniform.The powder is distributed through volumetric metering,and the distribution amount is timely displayed through the display screen.
4.All-round electronic monitoring,with sensors at the transmission parts.The powder bin is equipped with high and low material level electronic material level switches and alarms,which are displayed in real time through the display screen.
5.Fast loading,directly connected with the bulk powder transport tanker for loading,only a few minutes,which enhances the continuous operation ability.
6.Energy saving and environmental protection,the use of bulk powder is sufficient and the price is cheaper.The powder bin is equipped with dust removal device,which makes the construction more environmentally friendly.
7.Intelligently control the spreading amount(3-30 kg/㎡)and spreading width(1.25m-2.5m)to be adjustable at any time.
8.The operation is simple,the leather is solid and durable,the computer controller and power control box are in the cab,and only one driver is required to operate,that is,learning and learning.
9.It has high working efficiency and is not affected by the weather.It can stop and dry at any time.It can spread 50 tons of powder per hour,which can greatly shorten the construction period.
10.The spreader is vehicle mounted and can be installed on the dump truck as a special powder spreader.It can also be loaded on the transport vehicle,and the equipment can be unloaded and stored separately after construction.(single and double bridges,the carriage is 5.5-6 meters long and the load is more than 15 tons),
National direct selling and leasing.
Main technical parameters:
Spreading amount:3-30 kg/m2
Overall dimension:6500×two thousand and four hundred×2600（mm）